Digital refractometer Abbe

Refractive Index

SilverSchmidt Hammerlink

The SilverSchmidt is primarily used to assess the uniformity of concrete strength within a structure and to localize areas of inferior quality. Heavily textured surfaces, soft surfaces or surfaces with loose mortar should be prepared with the grinding stone to provide a smooth test surface.

Portable Hygropin PROCEQ for cements

Relative Humidity according to ASTM F2170-09

Portable Pin Free Moisture Meter Model MO280

Max. Measurement depth: 20mm (0.75”), Sensor area: 40 x 40mm (1.6” x 1.6”), Battery type: 9V (rear compartment), Display: LCD with sleep mode, Operating conditions: 0ºC to 50ºC (32ºF to 122ºF) 0 to 60%RH (non-condensing). Non-invasive measurement to monitor moisture in wood and other building materials. Select from 10 wood types and measurement ranges. Measurement depth to 0.75″ (20mm) below the surface. LCD displays % moisture of wood or material being tested. Electro-magnetic testing technology.

Laser dioLZR

Low Level Laser Therapy, 40 mW, 680 nm

Resipod Resistivity Meter

Resipod is a fully integrated 4-point Wenner probe, designed to measure the electrical resistivity of concrete in a completely non-destructive test. Surface resistivity measurement provides extremely useful information about the state of a concrete structure.

Kjeldahl system

Modules: Unit of disaggregation; Scrubber and water recirculation pump; Unit by steam distillation – is useful for quantitative determination of organic nitrogen in chemical substances like ammonia

VoltaLab 10, PGZ100, Electrochemical laboratory

Voltammetry and Electrochemical Impedance Spectroscopy

Turbidimeter TURB 550

Laboratory turbidity meter with infrared LED in accordance with ISO 7027.

Multiparameter kit C 932 T CONSORT

Determination pH, Conductivity, Resistivity, Salinity, TDS, Dissolved Oxygen, Temperature.

Arex Vertex heating magnetic stirrer

Magnetic stirrer with a heating plate manufactured by aluminum casting. The heating plate is covered by a special protection assuring a very uniform heating distribution on the whole surface with a high resistance to chemicals. The instrument is equipped by a connection for a contact Vertex thermostat for the direct control of temperature of the stirred liquid. Electronic speed control: 50 ÷ 1300 rpm Heating setting by means of a thermos-element from room temperature to 370°C. Diameter of heating plate: 155 mm. Sample temperature control with ± 0.5°C precision Stirring capacity (H2O): up to 20 liter.

Corrosion Analyzing Proceq, Canin+

For the localization and measuring of active corrosion of the building. Corrosion Analyzing Instrument in a fast and easy way using any PC.

RV 10 Basic Rotary evaporator

Universal heating bath. The condenser unit has specially designed glass tubes that utilize the 1500 cm² surface extremely efficient. Heating temperature max.: 180°C. Heat output: 1300W. Power input: 1400W. Speed min.: 20 rpm Speed max.: 280 rpm. Type of cooling: vertical. Permissible relative humidity: 80%. Reversible direction of rotation.

Digital stirrer IKA –RW20

Speed min.: 60 rpm. Speed max.: 2000 rpm. Frequency: 50/60 Hz. Stirring quantity max. (H2O): 20 L. Viscosity max.: 10000 mPas. Two speed ranges for universal use from 60 – 2.000 rpm. Dimensions: 88 x 212 x 294 mm (WxDxH)

Optical microscope NOVEX BTS

Interpupillary distance 55-75 mm, Tube 160 mm, Halogen lamp, DDC camera.

Diaphragm Pump ILMVAC MPC 201 Tp

Three-stage chemically resistant diaphragm pumps. Suction/pressure flanges: hose nozzle DN 8. Ultimate pressure < 2 bar. Pumping speed 60/60 Hz: 2.0/2.2 m3/h; 33/36 l/min. Dimensions (W/D/H): 200/260/150 mm. Moto-power: 90 W

Sonorex RK 510 H ultrasonic bath

High-power ultrasonic cleaning bath for aqueous cleaning solutions. Oscillating tank – Interior dimensions: 300 × 240 × 150 mm, l × w × d. Capacity: 9.7 litres. Operating volume: 6.6 litres. Filling level mark. Tank material: stainless steel AISI 304. Ultrasound Ultrasonic peak output: 640 W corresponds to 4 times ultrasonic nominal output. Ultrasonic nominal output: 160 W. Ultrasonic frequency: 35 kHz. Control: turning knob. Timer: 1 – 15 min. Temperature control Built-in heater 30 – 80 °C. Thermostatically adjustable. Heating power: 400 W.

Portable FTIR spectrometer

The equipment is necessary for field evaluation of monuments materials in order to evaluate the composition, structure and deterioration stage.

Spectrophotometer UV-VIS Specord M40

Solid, liquid and gaseous samples.

Spectrophotometer UV-VIS Specord M400

For solid samples. ATR, Fluorescence and mathematical processing models. Double beam and monochromator rANGE: 180-1000 nm.

Portable Colorimeter, Spectra Magic NX, CR-410

The equipment is necessary for field evaluation of monuments in order to evaluate the deterioration stage.

Portable Heavy Duty CFM-CMM Thermo-Anemometer With built-in non-contact IR Thermometer and Laser Pointer Model HD300 EXTECH

This handheld meter measures and displays air velocity, air flow (volume), temperature of air, and surface temperature (using the built-in non-contact IR thermometer).

Portable hardness tester Dyna Pull Off Tester – Dyna ESTRICH, PROCEQ

The Dyna pull off tester is used: to determine the surface strength of concrete and other materials testing it directly on the component allowing the use of any measuring point. Additionally for the measuring of the adhesive strength of applied coatings such as plastic coatings, concrete coats, and mortars and plasters. Measures the adhesive strength of applied coatings e.g. plastic or concrete coatings, mortars, plasters, bituminous coats. Determining the surface strength of concrete and other materials. The pull off tester is ideal for the evaluation of tensile strength in concrete renovation.