National Institute for Research & Development in Chemistry and Petrochemistry
ICECHIM
G12: Polymeric composites and nanocomposites
Platen Press P 200 E
DATA SHEET: - Two platen press with four-column construction and cooling cassette - Nominal platen size 200 × 200 mm; - Hydraulic force 120 kN; - Max specific pressure 312 N/cm2; - Motor power 0.8 kW; - Max operating temperature 300 °C. DESCRIPTION: Laboratory press with automatic cycle, fine adjustable temperature and high force of sealing the mould to ensure the compression molding of micro and nanocomposites with thermoplastic polymer matrices. The press is also designed for the preparation of the films with the thickness of less than 200 µm necessary.
Injection Molding Machine ENGEL ES 40/17 - ES 40/22
YEAR: 1978
Leistritz LSM 30.34
Modular intermeshing co-rotating twin screw extruder for melt mixing and masterbatch obtaining at laboratory scale. It is equipped with: - eight heating zones - seven air-cooled zones - a degassing zone - horizontal dosing feed - forced feeder - can measure the pressure and temperature of the molten material - K-Tron feeder Accessories: die head for strand die, water bath and granulator.
Brabender LabStation –System for rheological characterization and melt processing of polymers and composites
Brabender LabStation is a complex system for melt rheology characterization and preparation of composite by melt compounding and extrusion, rolling and film blowing. It has several interchangeable devices such as mixing chambers, double screw extruder, film blowing system and accessories (two roll mill, granulator, conveyor belt, blown film take off unit).
Alina E. Coman, Julien Peyrton, Gheorghe Hubcă, Andrei Sârbu, Augusta R. Gabor, Cristian A. Nicolae, Tanța V. Iordache, Luc Averous
Synthesis and characterization of renewable polyurethane foams using different biobased polyols from olive oil
European Polymer Journal
https://doi.org/10.1016/j.eurpolymj.2021.110363
Aura C. Mocanu, Florin Miculescu, George E. Stan, Robert C. Ciocoiu, Mihai C. Corobea, Marian Miculescu, Lucian T. Ciocan
Preliminary Studies on Graphene-Reinforced 3D Products Obtained by the One-Stage Sacrificial Template Method for Bone Reconstruction Applications
JOURNAL OF FUNCTIONAL BIOMATERIALS
https://doi.org/10.3390/jfb12010013
Zina Vuluga Z., Sanporean C.G., Panaitescu D.M., Teodorescu G.M., Corobea M.C., Nicolae C.A., Gabor A.R., Raditoiu V.
The Effect of SEBS/Halloysite Masterbatch Obtained in Different Extrusion Conditions on the Properties of Hybrid Polypropylene/Glass Fiber Composites for Auto Parts
Polymers, Volume 13, October 2021
10.3390/polym13203560
Radu E.R., Panaitescu D.M., Andrei L., Ciuprina F., Nicolae C.A., Gabor A.R., Truşcă R.
Properties of Polysiloxane/Nanosilica Nanodielectrics for Wearable Electronic Devices
Nanomaterials, Volume 12, December 2021
10.3390/nano12010095
Andrei L., Ciuprina F., Radu E.R., Gabor A.R., Panaitescu D.M.
Dielectric performances of LSR-SiO2 nanocomposites for wearable antennas substrate
International Symposium on Electrical and Electronics Engineering (ISEEE), October 2021
10.1109/ISEEE53383.2021.9628494
Chiulan I., Panaitescu D.M., Radu E.R., Vizireanu S., Sătulu V., Biţă B., Gabor R.A., Nicolae C.A., Raduly M., Rădiţoiu V.
Influence of TEMPO oxidation on the properties of ethylene glycol methyl ether acrylate grafted cellulose sponges
Carbohydrate Polymers, Volume 272, November 2021
10.1016/j.carbpol.2021.118458
Panaitescu D.M., Nicolae C.A., Melinte V., Scutaru A.L., Gabor A.R., Popa M.S., Oprea M., Buruiana T
Influence of microfibrillated cellulose and soft biocomponent on the morphology and thermal properties of thermoplastic polyurethanes
Journal of Applied Polymer Science, Volume 138, August 2021
10.1002/app.50951
Radu E.R., Panaitescu D.M., Nicolae C.A., Gabor R.A., Rădiţoiu V., Stoian S., Alexandrescu E., Fierăscu R., Chiulan I.
The Soil Biodegradability of Structured Composites Based on Cellulose Cardboard and Blends of Polylactic Acid and Polyhydroxybutyrate
Journal of Polymers and the Environment, Volume 29, January 2021
10.1007/s10924-020-02017-x
Raduly F.M., Rădiţoiu V., Rădiţoiu A., Purcar V., Ispas G., Frone A.N., Gabor R.A., Nicolae C.A.
Optical Behavior of Curcuminoid Hybrid Systems as Coatings Deposited on Polyester Fibers
Coatings, Volume 12, February 2022
10.3390/coatings12020271
Popa M.S., Radu E.R., Panaitescu D.M., Gabor A.R., Nicolae C.A., Raduly M.F., Adriana Nicoleta Frone A.N.
The Potential of Biopolyesters as Plasticizers for Polylactide
Chemistry Proceedings, Volume 7, February 2022
10.3390/chemproc2022007014
G.M. Oprica, D.M. Panaitescu, A.R. Gabor, C.A. Nicolae, A.N. Frone
Design of a new embossing substrate based on biopolymers
A XXXVI-a Conferinţă Naţională de Chimie, cu participare internaţională - CNChim–2022, Călimăneşti-Căciulata, judeţul Vâlcea, 4-7 octombrie 2022
I. Brezeștean, D. Marconi, A. Ciorîță, Z. Vuluga, I. Turcu
Thermal Induced Structural Changes in Innovative Bio-Based Polyamides
17th National Conference of Biophysics (CNB 2022), Târgu Mureş, Romania, 23-25 September, 2022
A. Ciorîță, A. Stoica, Z. Vuluga, I. Turcu
Toxicological evaluation of nanoparticles on cell culture
17th National Conference of Biophysics (CNB 2022), Târgu Mureş, Romania, 23-25 September, 2022
I.-A. Bala, N. Tritean, C. Roman, G.-M. Stan, C.-A. Nicolae, D. Constantinescu-Aruxandrei, F. Oancea
Stimulation of trichoderma sporulation by physico-chemical factors
NeXT-Chem, ‘’Tehnologii inovatoare trans-sectoriale”, Ediția a IV-a, București, România, 19-20 Mai 2022
A. Afilipoaei, G.M. Teodorescu, L. Jecu, I. Raut, M. Constantin, F. Oancea, Z. Vuluga
Mechanical Strength of Biomaterial Plates Based on Ganoderma Mycelium
NeXT-Chem, ‘’Tehnologii inovatoare trans-sectoriale”, Ediția a IV-a, București, România, 19-20 Mai 2022
C.D. Usurelu, D.M. Panaitescu, A.N. Frone, C.A. Nicolae. M. Raduly, L. Andrei, F. Ciuprina
Poly(vinylidene fluoride)-barium titanate nanocomposites with improved interface
NeXT-Chem, ‘’Tehnologii inovatoare trans-sectoriale”, Ediția a IV-a, București, România, 19-20 Mai 2022
C.D. Usurelu, D.M. Panaitescu, R.A. Gabor, C.A. Nicolae, M.F. Raduly, C.M. Damian, A.N. Frone
Bio-Based Epoxy Composites Containing Surface-Modified Cellulose Fibers
20th International Balkan Workshop on Applied Physics and Materials Science (IBWAP 2022), , Constanta, Romania, July 12-15, 2022
D. Panaitescu, C. Uusurelu, A. Frone, R. Trusca, C. Nicolae, R. Gabor, L. Andrei, F. Ciuprina
Thermal and mechanical properties of polivinyliden fluoride/nanosilica nanodielectrics
20th International Balkan Workshop on Applied Physics and Materials Science (IBWAP 2022), , Constanta, Romania, July 12-15, 2022
G.-M. Teodorescu, Z. Vuluga, A. Ionita, F. Oancea, J. Paceagiu, M. Ghiurea, C.A. Nicolae, R.A. Gabor
Properties of recycled polypropylene composites with alumino silicate industial waste
Priorities of Chemistry for a Sustainable Development, XVIII Edition, Bucharest, Romania, 26-28 October, 2022
I. Raut, I. Petre, M. Constantin, E. Alexandrescu, M. Raduly, A.-M. Gurban, M. Doni, C.-A. Nicolae, N. Radu, G. Vasilescu, C. Firinca, L. Jecu
Effect of incorporating an ureolytic bacterium on the properties of mortars
Priorities of Chemistry for a Sustainable Development, XVIII Edition, Bucharest, Romania, 26-28 October, 2022
Frone, A.N., Chiulan, I., Panaitescu D.M.
Invention Patent Request - Process for the production of micro(nano)cellulose crystals from plum seed shells
A00749
Vuluga, Z., Kaya, D.A., Albu, M.G.
Composition and process for coating of biomedical implants based on titanium alloy
131205
Dimonie, O.D.A., Trandafir I.G., Nicolae. C.A., Gabor, A.R., Constantin, V., Petrache, M., Cîmpean, A., Gălăţeanu, B., Costache, M.
Composition and process for obtaining hydrogels for adipose tissue regeneration
123143
Iancu, S., Duldner, M., Vuluga, Z., Radovici, C., Panaitescu, D., Iorga, M.
Oligoester ionomers from polyethylene terephthalate wastes useful as dispersing agent for nanocomposites and process for obtaining
128907
Panaitescu, D.M., Frone, A., Chiulan, I., Vuluga, Z., Iorga, M., Stanescu, P.
Invention Patent Request - Composition and technology to obtain nanocomposites based on polyhydroxyalkanoates and BC nanofibers
A00861
Corobea, M.C., Vuluga, Z., Florea, D., Iorga, M.D., Panaitescu, D.M., Albu, M.G.
Invention Patent Request - Antibacterial and antifungal composition for species resistant to antibiotic action and process for obtaining
A00179
Vuluga, Z., Sânporean, C.-G., Iorga, M.D., Panaitescu, D.M., Corobea, M.C., Florea, D., Iancu, S., Duldner, M.-M.
Invention Patent Request - Concentrate for improving the impact resistance of glass fiber reinforced polypropylene and process for obtaining
A00247
Panaitescu, D., Fone, N., Iorga, M., Iovu, H., Stanescu, P.
Cellulose nanofiber and the process to obtain nanofibers into powder form having shape factor and crystallinity
128509
Panaitescu, D., Fone, N., Iorga, M.
Polymeric composites with cellulose nanofibres and process for making the same
128508
Albu, M.G., Kaya, D.A., Vuluga, Z., Duran, N., Ayanoglu, F., Chelaru, C.
Invention Patent Request - Coating composition of implants with antimicrobial systems based on zeolite - essential oil - collagen hydrolisate and process of obtaining thereof
A00956
